Your browser is not fully supported. Please upgrade your browser.

Skip to main content
How to Process Wool

Weaving wool


Weaving is a process whereby woven fabrics are formed on a loom by the interlacing of warp yarns which are set length ways on the machine, and a weft yarn is inserted usually at right angles to the warp.

Warp and Weft

Prior to weaving, the warp yarns are prepared and assembled in a parallel manner. This preparation stage is known as warping, and is carried out on a machine known as a warping machine. Because lot sizes for wool, in comparison to some other fibres, tend to be relatively small, the method of sectional warping is the most commonly used.

Firstly the warp yarns are fed from a creel, and wrapped in small sections around a rotating taped drum, and then from the drum they are unwound and transferred to a beam, which fits directly onto the loom.

Most warps yarns are two-fold (2xply), because of greater strength and resistance to abrasion. Weft yarns are either singles (1xply) or two fold, depending on the required aesthetics and performance of the woven fabric to be produced.

During weaving there are three primary motions, these include:

In addition to these there is a let-off and take-up action which moves the fabric through the loom in a controlled way.

Different types of looms can be used to produce woven fabrics made from wool, with the exception of water jets (wool absorbs too much moisture).

Today, Rapier weaving looms are the most commonly used, because they are much quieter than projectile types (shuttle looms).

麗莎·格里普斯 (Lisa Griplas) 在媒體和通訊產業擁有超過十年的經驗。她作為一名貿易記者在一家日報工作了數年,後來轉到 The Woolmark Company 擔任全球編輯直到今天。